Selected projects we can talk about.

A few examples from a wider body of work for TSOs, DNOs, developers and OEMs. Most client work is confidential, so we name a client only when the work is already public.

No.01ClientConfidentialSectorPower-to-XStatusLive, FEED

Power-system modelling for a Power-to-X project.

We do all of the PSCAD and PowerFactory work for a large Power-to-X project that turns wind and solar power into e-fuels. The project is in front-end design.

Our role
Power-system modelling and studies
Tools
PSCAD, PowerFactory, Python
Duration
Front-end design
  1. 01PSCAD and PowerFactory models
  2. 02EMT and RMS studies
  3. 03Grid code, harmonics and protection
  4. 04Input to FEED decisions

Examples of finished work.

No.02TypeEMT modelClientConfidentialStatusDelivered
Terminal voltagePSCADSite measurement

Generator EMT model, checked against site measurements

For a synchronous generation plant we built a full EMT model in PSCAD, covering the machine, excitation, stabiliser and protection. We compared it first with PowerFactory, then with measurements from the real units.

2 stagesPowerFactory, then site data
7 of 7checklist items met
4 pointsplus FRT, against site data
Read the case study
No.03TypeEMT complianceClientConfidentialStatusDelivered
Mode 1Mode 2Mode 3Critical point (−1, 0)

40 MW battery: SSO screening and NESO compliance

A battery plant connecting in Great Britain had to show NESO that it was stable and rode through faults. We produced all of the evidence from one PSCAD model.

40 MW12 inverters, 33 kV
3 modesno Nyquist encirclement
4 faultsexport and import
Read the case study
No.04TypeRMS to EMTClientInternal toolingStatusIn use
POIFull network scanReduced model scan

Network reduction for EMT studies

Wide-area RMS models are too big to convert to EMT as they are. Our toolkit trims the distribution network first, then two screening tools place the study boundary by measurement: a harmonic impedance scan and a voltage-dip screen.

3 toolsreduce, then screen the boundary
1 substationadded per scan
Liveinteractive demos
Try the toolkit

What our workflows can do.

No.05TypeMulti-agent workflowBuilt withAI workflowsStatusIllustrative

SAGE: a smart agent for grid reinforcement

A physics-aware AI workflow around PowerFactory and Python. Agents plan the study, run it, rank the reinforcement options, screen compliance and draft the report. An engineer signs off every step.

5 agentsplus a coordinator
N-1, N-2compliance screened
1 engineersigns off every gate
See the illustrative case
No.06TypeDistributed stabilityForTransmission operatorsStatusIllustrative

Stability services from below 132 kV

Plant below 132 kV could supply inertia, system strength and damping, but it has never been qualified to. We are building the evidence, the model and a scorecard a transmission operator can buy against.

5 servicesinertia to voltage
RMS + EMTat the connection point
1 scorecardready for procurement
See the illustrative case

Working on something similar?

01The system02The codes that apply03The question you need answeredWe usually reply within two working days
Up next · 07 About Velon Energy